Battery Not Charging to Full
First, make sure not to confuse this with battery wear!
Battery wear is when your battery charges to 100%, but its actual full capacity no longer reaches the manufacturer’s original design capacity. You can run the following command to check:
| |
For example, here is my current output:
| |
Here, my battery’s design capacity is 45000 mWh, but right now when it charges to 100%, it only reaches 38280 mWh. At the bottom, tlp-stat summarizes that my battery has worn down by about 14.9% compared to when it was new (which I think is pretty normal, since I’ve been using it for a year and played quite a lot of games, which got the laptop pretty hot).
That’s battery wear. In my case, it’s still fine, though if it ever wears down by, say, 90%, the only fix is to replace the battery. Then again, batteries are designed to… eventually wear out anyway :v
Now here is the actual issue I want to talk about: the battery only charges up to a certain percentage and then stops, refusing to charge any further. If it stops around 90–95%, that’s normal, because some laptops are designed to stop charging around that level. However, if it stops around 60% or 80% (in my case, it stopped at 79%), then something is “abnormal”. I don’t know the exact cause, but here is how to fix it:
| |
Good luck, and may your battery live a long life alongside your laptop :)))
Comments